Propel Bikes

Good for: Restoring your bike to its former glory, recommended annually depending on usage.

This service is a full strip down of a bike to a bare frame It includes the following:

Bike stripped to a bare frame, frame and fork cleaned and checked.

Headset and bottom bracket are removed, their condition is checked, they are greased and refitted.

Wheel hubs are disassembled as necessary, checked for damage, cleaned, greased and reassembled.

Drive chain and brakes are degreased and serviced.

Replacement high quality stainless steel cableset & black outers where fitted / Premium black handlebar tape where appropriate.

Then the bike is serviced as per a general service.

Good for: Bikes that have picked up all of the dirt and grime from the roads.

This service is a partial strip down of a bike with the degreasing of parts.

It includes the following: Drive chain is removed and de-greased, serviced and refitted.

The bike is then serviced as per a general service.

Good for: All bikes at least every six months to keep things running smoothly

This service is our main service It includes the following:

Wheels are trued, hubs are checked for play and adjusted if needed.

Headset and bottom bracket are checked for play and adjusted if applicable.

Gears are tuned and indexed, cabling and parts replaced as needed.

Brakes are balanced and tightened, cabling and pads are replaced as needed.

Nuts and bolts are checked such as crank, stem and handlebar clamp.

Tyres are inflated and the drive chain is lubricated.

Inspection / Assessment – £30

Includes:

• Initial inspection
• Frame condition check
• Determining best removal method
• (This fee is deducted from the final cost if removal is successful.)

Standard Removal – From £95

Advanced Removal – From £150

Optional:

Seat Tube Clean & Anti-Seize Treatment – £25

Prices depend on severity and time required.

Important: Seized seatpost removal is a last-resort procedure. The seatpost will likely be damaged during removal and should be replaced. While every care is taken, there is a risk of damage to the bicycle frame due to corrosion or the forces required. By authorising this work, you accept these risks and agree that Propel Bikes cannot be held responsible for damage resulting from the removal process.