Work Description: P.MS: TIME: 5:00h
This premium maintenance program begins with full-body disassembly and a complete wash to expose and restore every operational area of the scooter. The CVT transmission system, including both front and rear pulleys, is cleaned, dried, lubricated, or replaced if necessary. Braking performance is optimized through caliper pad or drum shoe servicing, lever cleaning and greasing, brake cable inspection or replacement, caliper cleaning and setup, and master cylinder inspection with full fluid re-bleeding. Accelerator and throttle cables are checked or changed to ensure precise throttle response. Intake and ignition systems are refreshed with air filter servicing or replacement and spark plug cleaning or renewal with proper calibration. Fuel-air delivery systems are fully serviced, including carburetor or throttle body cleaning, sensor tuning, and performance setup. Starter relay is inspected and protected against rust, while the self-motor is cleaned or overhauled. Stator components are checked, cleaned, dried, and reset. Engine coolant is inspected and refilled as required. Complete EFI diagnostic scans and system parameter checks are performed, including O2 sensor cleaning and recalibration for accurate fuel-air feedback. The front fork receives full service, with cleaning, new fork seals, and fresh oil or replacement kit installation. Steering race bearings are inspected or replaced, engine hanger bushings and rear suspension bushings are evaluated and renewed where needed. All electrical connectors are cleaned, lubricated, or replaced, and both front and rear wheel bearings are lubricated or changed. Battery health is monitored or replaced if necessary, and tire pressure is set to correct factory-grade specification for both wheels. Note: All inspections, component adjustments, and service actions are documented and secured under Sam Auto Zone control. All information rights remain reserved.